Ford Ranger 2.0 EcoBlue remap Worksop
213 → 250 bhp · 500 → 560 Nm · £325 – £400 · on your driveway
The bi-turbo 2.0 Ranger carries a lot of weight and tows a lot more. A Stage 1 adds 60 Nm low down and sharpens the throttle so the 10-speed auto isn't constantly shuffling. Popular with farmers and trades around Newark, Mansfield and Loughborough.
Stock vs Stage 1
Ford Ranger 2.0 EcoBlue remap figures
- Engine
- 2.0 EcoBlue bi-turbo diesel (213 PS)
- Years
- 2019–2022 (T6 facelift / Wildtrak / Raptor)
- ECU
- Bosch MD1CS005
- Gearbox
- 10-speed automatic
Indicative figures from our calibration data for this platform. Your car is baseline-logged and verified on the day.
What we change
Inside the Ranger 2.0 Stage 1 file
- ▸Boost raised across both turbo stages
- ▸Rail pressure and injection re-scaled
- ▸Torque limiters lifted for towing
- ▸Throttle and torque request sharpened
Pre-map checks
What we check on a Ranger 2.0 first
- ▸DPF and EGR condition
- ▸Oil dilution level
- ▸Boost hold on both turbos on baseline log
- ▸Transmission adaptation values
Found a fault? We quote the fix separately via mobile diagnostics — we never map an unhealthy car.
Why Worksop Ranger 2.0 owners remap with us
Bassetlaw is working-vehicle country: pick-ups and Transporters on sites and farms around Worksop, Retford and Carlton-in-Lindrick, plus a steady flow of A57 and M1 J30/J31 commuters into Sheffield and Nottingham in 320ds and A4s. Both groups want the same thing from a Stage 1 — more torque low down, fewer downshifts and better MPG — and both can have it done on the drive without a trip south.
The Ford Ranger 2.0 EcoBlue is one of the vehicles we tune most around Worksop, so the calibration is refined over many local data-logs on the A57, A60, A619 and M1 junctions 30–31 — not a generic file. Every Ranger 2.0 gets a pre-map health check, VIN-specific write and a logged verification drive on your local roads.
◉ The process
How mobile remapping works in Worksop
Fixed quote from your reg
Send your registration by WhatsApp, phone or the booking form. You get a fixed, vehicle-specific price for Worksop — not a 'from' figure that climbs on the day.
We come to you
We arrive at your home, workplace or yard anywhere in Worksop with genuine, licensed tuning tools (not clone hardware) and a professional data-logger.
Pre-map health check
Full OBD diagnostic scan and live-data baseline log. If the DPF, EGR, turbo or sensors show a problem, we tell you before writing anything.
Read & archive your original file
Your factory ECU file is read and archived securely so the car can be returned to stock at any time — before a dealer visit or when you sell.
VIN-specific calibration written
The remap is written for your exact ECU, engine and hardware — fuelling, boost, torque limiters and timing adjusted within safe factory tolerances.
Logged verification drive
A post-map road test on local Worksop roads with live data-logging. You see the before/after figures and we check knock, EGTs, boost and fuel trims are all where they should be.
◉ FAQ
Ford Ranger 2.0 EcoBlue remap Worksop — FAQ
Is the Ranger 2.0 EcoBlue read via OBD?
Most MD1CS005 units are OBD-readable; some require bench. Either way it's a driveway or yard job.
Will a remap affect my Ranger's towing capacity?
The legal towing limit is unchanged. What changes is how easily it tows — more torque from lower revs, fewer downshifts.
How much does a Ford Ranger 2.0 EcoBlue remap cost in Worksop?
A Stage 1 remap on a Ford Ranger 2.0 EcoBlue in Worksop is £325 – £400, fixed before we book. That includes the pre-map health check, VIN-specific calibration, logged verification drive and 30-day warranty. Gearbox tuning, where available, is quoted separately.
Do you come to me in Worksop to remap a Ranger 2.0?
Yes — we're fully mobile. We'll map your Ranger 2.0 on your driveway or at work anywhere in Worksop, including Retford, Carlton-in-Lindrick, Shireoaks, Rhodesia, Manton, Gateford.
Do I need to tell my insurer about a Ranger 2.0 remap?
Yes — any ECU modification must be declared. Most mainstream insurers accept a Stage 1 with a small premium adjustment. We can supply a written spec for your insurer.
Can the Ranger 2.0 be returned to standard?
Yes. Your original file is archived and a return-to-factory takes around 30 minutes, at any time.
Stage 1 results
Other diesel remaps in Worksop
Manufacturer stock output vs our typical Stage 1 calibration for each platform. Indicative figures — every car is health-checked and verified with a live road data-log, and your before/after numbers are shown to you on the day.